36" Black Base Traffic Cones

28" 10 lb traffic cone

Effective Black Base Traffic Cone Placement for Work Zone Safety

WorkzoneSupply Black Base Traffic Cone Placement According to MUTCD and Flagger Policies

Traffic cones are a vital part of work zone safety, helping to direct traffic and protect workers and pedestrians. Black base cones are particularly useful for night work and low-light conditions, as they are more visible than traditional orange cones.

The Manual on Uniform Traffic Control Devices (MUTCD) provides specific guidelines for the placement of traffic cones in work zones. These guidelines are designed to maximize safety and minimize traffic disruptions.

MUTCD Guidelines for Black Base Traffic Cone Placement

  • Spacing: Cones should be spaced no more than 10 feet apart in low-speed zones and no more than 20 feet apart in high-speed zones.
  • Taper: Cones should be tapered to provide a gradual transition from the normal traffic lanes to the work zone. The taper should begin at least 500 feet before the work zone and continue for at least 100 feet beyond the work zone.
  • Height: Cones should be at least 18 inches tall in low-speed zones and at least 28 inches tall in high-speed zones.
  • Reflectorization: Cones should be retroreflective, meaning that they reflect light back to the source. This makes them more visible at night and in low-light conditions.

Acceptable Flagger Policies

Flagger policies vary from state to state, but there are some general guidelines that should be followed. Flaggers should:

  • Be properly trained and certified.
  • Wear high-visibility clothing and gear.
  • Use clear and concise hand signals to direct traffic.
  • Be aware of their surroundings and be prepared to react to unexpected situations.

Checking State Requirements for Black Base Traffic Cone Placement and Flagger Policies

The best way to check state requirements for traffic cone placement and flagger policies is to visit the website of your state’s department of transportation. Most state DOT websites have a dedicated section on work zone safety that includes information on traffic cone placement, flagger policies, and other relevant regulations.

WorkzoneSupply Black Base Traffic Cones

Workzonesupply black base cones are made of durable materials and meet all MUTCD requirements for retroreflectivity and visibility. They are also available in a variety of heights to suit different work zone needs.

Conclusion

By following MUTCD guidelines and acceptable flagger policies, you can help to ensure the safety of workers, pedestrians, and drivers in work zones. Workzone Supply black base cones are a durable and visible option for traffic cone placement in work zones.

Additional Tips for Traffic Cone Placement

  • Place cones in a straight line, parallel to the edge of the roadway.
  • Place cones in areas where they are clearly visible to drivers.
  • Use additional cones to mark any hazards in the work zone, such as potholes or uneven pavement.
  • Inspect cones regularly and replace any that are damaged or missing.

By following these tips, you can help to ensure that your traffic cones are effective in directing traffic and protecting workers and pedestrians in work zones.

[porto_best_selling_products view=”grid”]

home